WB Electronics
Back
Download
History for Infinity USB Unlimited
2.84 Build - Wednesday, August 24, 2016
[New feature]
Added WHQL certified drivers
Added new card: ATmega8515 + 24C64
 
2.82 Build - Friday, January 11, 2013
[New feature]
VCP (Virtual COMport) and USB driver updated for Windows 8 (32 / 64 bit).
 
2.81 Build 2052 - Tuesday, October 18, 2011
[Bugfixes]
Software unexpectedly shut down after using custom card.
Driver was updated because of issues with Windows XP SP3 (hangs during installation).
 
2.80 Build 2049 - Thursday, September 9, 2010
[New features]
Updated language layer.

[Bugfixes]
VCP now supports suspend/resume.
Changed handling of UAC under Windows 7 (required by USB driver).
Many minor bugfixes and improved stability.
 
2.78 Build 2045 - Friday, October 30, 2009
[Bugfixes]
Gammacard fileimport fixed when importing certain (.gam) file variants of very large sizes.
 
2.77 Build 2020 - Thursday, July 30, 2009
[New features]
Gammacard fileimport improved to support more file variants (.gam).
 
2.76 Build 1987 - Friday, May 22, 2009
[New features]
VCP was limited to 10 devices per PC, now increased to 25 by request.

[Bugfixes]
Eliminated error code 8557 seen under rare circumstances.
 
2.75 Build 1962 - Friday, February 6, 2009
[New features]
Commandline switch for 3.3V cards.

[Bugfixes]
Fixed a bug that prevented the use of commandlines.
 
2.74 Build 1954 - Thursday, January 29, 2009
[New features]
Added native support for GammaCard
Added commandline switch to control boostfactor when enabling the VCP from a commandline
 
2.72 Build 1930 - Monday, November 24, 2008
[New features]
Added support for 3.3V cards in VCP (switchable from 3.3 to 5.0V)
 
2.71 Build 1919 - Thursday, April 10, 2008
[New features]
Improved VCP compatibility.
Added support for synchronous cards (I2C / SLE).
 
2.70 Build 1897 - Friday, September 14, 2007
[New features]
Added support for Funcard ATmega168.
Updated USB drivers, now signed and tested by WHQL for Windows Vista x64.
Updated and signed VCP driver for Windows Vista x64.
VCP now shows which 3rd party application uses its com port.

[Bugfixes]
Fixed a compatibility issue in the newly added VCP in v2.65 where some 3rd party software would timeout with certain OS cards.
 
2.65 Build 1834 - Wednesday, February 14, 2007
[New features]
Updated to support Windows Vista
Entire VCP module (Virtual ComPort) updated, general performance upgrade and VCP now works on Windows Vista, Windows XP64 and Windows Server 2003

[Bugfixes]
Solved various bugs causing problems when running two or more programmers and / or applications simultaneously
 
2.63 Build 1798 - Tuesday, June 6, 2006
[New features]
Updated to support PasswordSafe/WinLogon
Updated language

[Bugfixes]
VCP was not properly installed on Windows Server 2003
 
2.62 Build 1767 - Friday, February 17, 2006
[Bugfixes]
Under very rare conditions, the software would terminate when loading a (hex) file to be programmed. The error only exists if Adobe Acrobat Reader 7.0 is installed on Windows XP SP2, and is caused by a component in Acrobat reader.
 
2.61 Build 1764 - Tuesday, January 24, 2006
[New features]
Command line parameters for VCP.
Simple integration with Infinity PasswordSafe

[Misc.]
Infinity PasswordSafe and Infinity SimEditor included in setup-file
 
2.60 Build 1727 - Wednesday, November 30, 2005
[New features]
64bit driversupport for Windows XP64
 
2.60 Build 1727 - Monday, May 30, 2005
[New features]
Multiprogramming mode
Boostmode and custom frequency added for VCP mode
Generally improved compatibility for VCP mode
Improved detection algorithm (especially for PIC based cards)
 
2.50 Build 1688 - Friday, April 8, 2005
[New features]
Virtual COMport (VCP) for 3rd party software support
LED behavior (Software startup, About-box and software exit (enabled in LED Settings dialog)
 
2.31 Build 1664 - Monday, March 28, 2005
[New features]
TitaniumCard2 now programs in high-speed mode

[Bugfixes]
Crash when pressing "Detect OS" in full detect dialog fixed
A few languagelabels were misplaced
 
2.30 Build 1653 - Monday, March 21, 2005
[New features]
Support for KnotCard2
Support for TitaniumCard2
DragonLoaderCard (both PIC and AVR) writing made easier with built-in loaders

[Bugfixes]
Fulldetection of DragonLoaderCard (PIC) fixed
Better detection of locked Atmel CPUs (detection of a locked Atmel CPU would in rare circumstances crash the software)
Code protecting a Funcard Atmega163 now works
OposCard (OS 1.3) failed on certain PCs
 
2.15 Build 1625 - Friday, February 25, 2005
[New features]
Clone card wizard, for very easy copying/cloning of all AVR and PIC based cards (including DragonLoaderCards)
Verify card against loaded files (normal programming verification is done during programming, so this option is only for comparing for instance 2 cards)
Support for TitanCard
Language-updates

[Bugfixes]
Minor changes and bugfixes
 
2.10 Build 1614 - Saturday, February 12, 2005
(First public release)
 
Did you know?
The Infinity PasswordSafe software is used to store and manage password in a very easy and secure way on a smartcard.
It supports both the Infinity USB Unlimited and Smartmouse USB hardware!

Read more here!
Copyright ©2001-2024 WB Electronics - All rights reserved - Privacy policy